|Your cart is currently empty|
- STARTER SETS & KITS (6)
- ROBOTICS (39)
- ARDUINO COMPATIBLE Microcomputers (6)
- ARDUINO SHIELDS (21)
- RELAYS and POWER CONTROL (24)
- DISPLAYS: LCD + (10)
- SERVOS+MOTORS (18)
- IC's, OptoElectronics, LEDs, Regulators (57)
- ELECTRONICS PARTS Assortment Kits (29)
- RESISTORS-CAPACITORS (23)
- COMMUNICATIONS: Wireless, Internet, GPS, Serial, RS485, IR (28)
- ELECTRONIC BRICKS (61)
- SENSORS + SWITCHES (53)
- CABLES + Wire + Connectors (34)
- Power+Batteries (15)
- Electronics Assemblies + Displays (43)
- Arduino Accessories + Programmers (3)
- LAB: Prototyping + Tools + Test Equipment (25)
|View Larger Image||
AC Solid State Relay 2-Channel
2-channel 2 AMP Solid State Relay board
Control 2 loads of up to 2 amps at 120V or 240V AC. Good for lighting, Holiday displays etc. NOTE: This is an ON-OFF zero-crossing type board. It does not do dimming.
See more details, applications on our WIKI here: (under construction)
With 2 Solid State Relay: 2A at 100 to 240VAC.(50/60Hz).
(Schematic of one channel below)
5VDC / 160mA (all channel ON).
Input control signal voltage:
0V - 0.5V Low stage (SSR is OFF),
0.5V – 2.5V (unknown state).
2.5V - 20V High state (SSR is ON).
Part number: G3MB-202P, 5V version.
Zero cross: Yes.
Rated output load: 2A at 100 to 240VAC.(50/60Hz).
Load type: General purpose.
Please Read This Electrical Safety / Disclaimer page before using the relay board in this product.